Ferris and friends, based in Canberra Australia flag, blog about the cars and games that inspire them most.
Showing posts with label mame. Show all posts
Showing posts with label mame. Show all posts

Sunday, October 5, 2008

Building my first arcade cabinet: Part X

A few more photos, now that I have added some instruction cards for old-school authenticity :)

Friday, October 3, 2008

Building my first arcade cabinet: Part IX

The marquee is complete!  I purchased some perspex (cut to size) from Eddie Walewicz Glass in Fyshwick, and spent an hour or so cutting out the speaker holes and drilling holes for screws.  Another hour or so was spent trimming the three separate print outs and making sure they lined up with the perspex and the front of the cabinet when assembled.  I think the end result is pretty good... it's not perfect (like the rest of the cabinet :), but I managed to achieve the look and quality of finish I was aiming for.  Note that my marquee isn't backlit, although the photos give that impression due to the camera flash. One thing that's a bit hard to see from the photos is the piece of tinted perspex I have placed over the monitor.  It makes a huge difference to the look of the cabinet... it certainly looks more professional and authentic now.  So, just one thing left to do, which is to source some black rubber edging... and then I will be completely finished! :)


Saturday, September 20, 2008

Building my first arcade cabinet: Part VIII

Just a quick update today. I've finally finished (and printed) my marquee design!  The image above is a low-res version, with the black circles representing the location of the speaker covers. Using Inkscape (a cool open source vector art package) and borrowing some images from Arcade Art, I think I've managed to produce something that looks presentable.  I exported the completed vector image as three separate bitmaps (around 5Mb each), and printed them onto three pages of Canon glossy paper.  The print quality from our Canon MX300 printer is pretty amazing... I just hope I can somehow join the separate pages together so that it looks seamless.  Now all I have to do is track down some clear plastic sheets and work out a way to affix it to my cabinet...

Wednesday, September 10, 2008

Building my first arcade cabinet: Part VII

I couldn't resist uploading a few more photos! Last night I added a metal kickplate and decorative strip on the front of the control panel. I think they make a huge difference to the visual appeal of the cabinet. Tonight I attached the rear panel, after first mounting the external power switch to it.  At least the cats can't get inside the cabinet now!  These latest photos show the illuminated buttons on the front panel, which I have configured to select, pause, and exit games.  Very handy indeed, and they look pretty cool as well :)Not much left to do now to complete the cabinet- I need to track down some rubber edging, order some glass/plexi/lexan (not sure which one) to cover the screen, and create and print some artwork for the top panel.  I'll give myself plenty of time to organise these finishing touches, as I'm not sure I can keep going at the pace I had set myself!  Besides, the cabinet is now fully functional, and I'm keen to get some game time in... :)

Sunday, September 7, 2008

Building my first arcade cabinet: Part VI



Almost done!  I moved the cabinet into the house (with some help - thanks Anthony!), and then  finished off the wiring and assembly.  I had to overcome a few last minute issues, mainly caused by not allowing enough room under the control panel for the buttons and microswitches etc, but at the end I managed to get everything together.  I now have a button connected to the PC's power switch, and with everything plugged into a power board it is only two button-presses to start the arcade cabinet...  turn the power on at the wall, then press the button connected to the PC's power switch.  I can get this down to one button press if I buy a smart power board, such as this one from Jaycar. 

The ugly bare wood you can see on the front of the control panel will be covered by some nice metal sheeting, which I will also use for a kick plate.
Oh, and for those that were wondering, the first game I played on the cabinet was Galaxian :)


Saturday, September 6, 2008

Building my first arcade cabinet: Part V

Everything is progressing well... spent many hours today building the control panel.  It all took much longer than I expected, which is pretty much par for the course when building an arcade cabinet!  Attaching the vinyl overlay was a painful experience, and something I'm not keen to repeat in a hurry.  Wiring was fun though, and everything went according to plan.  I'm now at the stage where I can attach the control panel, front panel, and rear panel to the main cabinet... just need to haul the cabinet in from the garage!  Then it's just a few finishing things: installing an external power button (connected to my PC's power button), adding a metal kick-plate, and sourcing some rubber for the edging.

Control panel (well, the beginnings of one anyway...)

Microswitches and spare joystick top

Buttons and Joysticks installed


Front panel with coin button

Control panel all wired up to I-PAC controller.  Everything worked first time!

Finished control panel with vinyl overlay


Saturday, August 30, 2008

Building my first arcade cabinet: Part IV

Time for priming and painting!  After filling in screw holes and sanding, I made a trip to the hardware store and bought some spray-on primer and paint.  I have been deliberating the merits of spray paint vs a tin of paint and roller, but in the end I went the spray route.  I must say that particleboard soaks up a lot of primer and paint!  I'm not exactly sure how many cans of primer and paint I went through (maybe 9 in total!), but hopefully the end result will justify the higher-than-anticipated expenditure!  Here are some progress photos for your enjoyment :)




Saturday, August 23, 2008

Building my first arcade cabinet: Part III

It may not look much different from my previous post, but I've put in (quite!) a few hours on my arcade cabinet since then.  The most obvious additions are the speakers and the top panels, although I have done other work including counter-sinking screws etc.  The top panels and bezel were a bit fiddly, especially when I was trying to measure while using a pencil and holding several bits of wood together.  It was during moments like these that I wished I owned a wider range of clamps :)  Cutting the speaker holes was pretty straightforward- I used a drill to make some holes, then cut them out with a jigsaw.  While I successfully got the job done, I'm glad the speaker covers hide my "craftsmanship" :)  The last photo shows my Capcom Street Fighter 2 template, which will come in handy when I receive my buttons and joysticks.  Next jobs will be using filler to hide screw holes and sanding ready for painting.

Wednesday, August 20, 2008

Building my first arcade cabinet: Part II

I'm pleased to say I'm making progress, as these photos hopefully demonstrate.  Cutting the monitor bezel was tough, and I wasn't entirely sure of my measurements, but it all seemed to work out ok.  The control panel board and large board at the front of the cabinet are not yet fixed in place, but even like this it gives a pretty good idea of how the cabinet will look when finished.  Of course the control panel will be covered with an overlay and the edges will be hidden by some kind of molding to help prevent chipping. Lots of work still to do, but it seems to be going OK so far! :)

Sunday, August 17, 2008

Building my first arcade cabinet: Part I

I'm building an arcade cabinet!  I'm not sure what tipped me over the edge on this one- it was a steady progression I think. One minute I'm playing a few old games in MAME, the next I'm reading blogs and websites detailing people's hand-build arcade cabinets.  Before I knew what was happening I was making plans and pricing up my own DIY cabinet :) 
Over the past few weeks I've bought a 2nd hand PC and 21" CRT monitor, as well as a cheap 2nd hand cabinet from an ex-govt. furniture shop.  I've been visiting a lot of sites on the Internet (some good ones here, here, here, and here) and bought some plans from a helpful guy named Bob. I used the plans as a guide and designed my own template, taking in to account my monitor dimensions etc. After making a strong base to support the heavy monitor, I picked up a jigsaw (for the first time in my life!) and attacked the particle board. After a bit of hand sanding I bolted the panels to the cabinet.  Here are the results of my efforts...

Progress to-date


Monitor mount/support


Side panel


Cardboard template

Lots still left to do, but I'm happy with my progress so far. While I can't wait to have it finished, I'm thoroughly enjoying the process of building my first arcade cabinet!